sumitomo减速机,弗兰德减速机,重齿,南高齿-乐博28app下载
传动设备(上海)有限公司 设为首页 - 加入收藏 - 技术博客 - 网站地图
   齿轮马达
RR系列同轴式斜齿减速机
RS系列斜齿轮-蜗轮减速机
RK系列斜齿-螺旋锥齿轮减速机
RF系列平行轴斜齿减速机
   行星减速机
RP系列行星减速机
   重载齿轮箱
RHB工业齿轮箱
RM系列大型工业减速器
   高速齿轮箱/增速箱
R高速齿轮箱/增速箱
   风电齿轮箱
R风电齿轮箱
   三相异步电动机
R三相异步电动机
您当前位置: 首页 > 新闻资讯
减速机厂摆线针轮减速机性能特点及技术参数

减速机厂摆线针轮减速机性能特点:

Performance characteristics of cycloidal pinwheel reducer in reducer plant:

●摆线针轮减速机高速比和高效率单级传动,就能达到1:87的速比,效率在90%以上,如果采用多级传动,减速比更大。

- cycloid reducer high speed and high efficiency than single stage transmission, can achieve 1:87 ratio, efficiency is more than 90%, if the use of multistage transmission, gear ratio greater.

●减速机结构紧凑体积小由于采用了行星传动原理,输入轴输出轴在同一轴心线上,使其机型获得尽可能小的尺寸。

The reducer has a compact structure and small size as a result of the planetary transmission principle, the input shaft and output shaft in the same axis, the machine size as small as possible.

●减速机运转平稳噪声低、摆线针齿啮合齿数较多,重叠系数大以及具有机件平衡的机理,使振动和嗓声限制在最小程度。

- low noise, stable operation speed reducer of cycloid gear the number of overlapping coefficient and balance mechanism with mechanical vibration and noise, which limits the minimum degree.

●摆线减速机使用可靠、寿命长因主要零件采用高碳铬钢材料,经淬火处理(hrc58~62)获得高强度,并且,部分传动接触采用了滚动摩擦,所以经久耐用寿命长。

- cycloid reducer reliable and long life for the key parts are made of high carbon steel materials, quenched (hrc58 ~ 62) to obtain high strength, and part of the rolling friction transmission contact, so durable long life.

●减速机设计合理,维修方便,容易分解安装,最少零件个数以及简单的润滑,使摆线针轮减速机深采用户的信赖。

The speed reducer of reasonable design, convenient maintenance, easy installation and a minimum number of components of decomposition, and the simple lubrication, the cycloid reducer deep mining user's trust.

减速机厂摆线针轮减速机技术参数:

Technical parameters of cycloidal pinwheel reducer in reducer plant:

摆线针轮减速机功率:从0.37KW~55KW之间可自由选择;

Cycloid reducer power: free choice between 0.37KW ~ 55KW;

摆线减速机转矩:从150N·m~20000N·m之间不等;

Cycloid reducer torque: from 150N ~ m ~ 20000N ~ m;

摆线针轮减速机传动比:单级速比有:9-87;

Cycloid gear reducer transmission ratio: single speed ratio is: 9-87;

摆线减速机双级速比有:121-7569;

Double speed ratio of cycloid reducer is: 121-7569;

摆线针轮减速机三级速比有:2057-658503;传动比可自由组合,以获得最佳输出转速;

Cycloid reducer three ratio: 2057-658503; transmission ratio of free combination, in order to obtain the best output speed;


日期:2017/2/16 16:00:42
咨询QQ
点击这里给我发消息